R o u t i n e M a i n t e n a n c e
Cleaning the Monitor
O
M
N-600x Service Manual
XI
AX
WARNING: Do not spray, pour, or spill any liquid on the N-600x, its
accessories, connectors, switches, or openings in the chassis as this may
damage the pulse oximeter.
For surface-cleaning and disinfecting follow your institution's procedures or use
the steps outlined below:
To surface clean the monitor:
1. Obtain a soft cloth.
2. Dampen the cloth with either a commercial, non-abrasive cleaner or a solution
of 70% alcohol in water.
3. Lightly wipe each exterior surface using the dampened soft cloth.
To disinfect the monitor:
1. Saturate a soft cloth with 10% solution of chlorine bleach in tap water.
2. Lightly wipe each exterior surface using the saturated soft cloth.
Caution: Before attempting to clean an SpO
directions for use enclosed with the O
specific cleaning instructions.
Routine Maintenance
O
M
sensor, read the
2
XI
AX
M
sensor. Each sensor model has
XI
AX
11