Trend Data Printout (Ascii Mode) - Nellcor OxiMax N-600x Service Manual

Data Port Interface Protocol

Trend Data Printout (ASCII Mode)

144
Table 22: Operating Status Codes
Code
PS
SD
SH
SL
- - -
*
Note: A Sensor Disconnect can cause three dashes [ - - - ] to display in the
patient data section of the printout.
The format of data displayed when a trend printout is requested is similar to that
of the real-time data. The only differences are that "TREND" is displayed in the
top row instead of the "CRC:XXXX" software verification number, and there is
no "Status" column (Figure 18).
Readings are displayed in 2-second intervals. The values on each row are an
average for the 2-second period.
At the end of the printout, an "Output Complete" line indicates the transmission
was successful. If the "Output Complete" line is not present, the data should be
considered invalid.
N-600x VERSION X.X.X.X TREND
ADULT 0SAT-S
TIME %SpO2
01-JAN-06 14:00:05 100
01-JAN-06 14:00:09 100
01-JAN-06 14:00:13 100
Output Complete
Figure 18: Trend Data Printout (ASCII Mode)
Meaning
Pulse Search
Sensor Disconnect
Saturation Upper Limit Alarm
Saturation Lower Limit Alarm
No Data Available
Alarm Parameter Being Violated
SpO2 Limit: 70-100% PR Limit: 60-160BPM
SPO2 RESP MODE: NORMAL
BPM PA
120 150
121 154
120 150