Nellcor OxiMax N-600x Service Manual page 46

Performance Verification
40
7. Press the SRC-MAX %SpO
LED lights. The monitor displays three [ - - - ] dashes until the %SpO
stabilizes to a value between 88 and 92 inclusive. The following screen
displays:
• No active audio alarm.
• %SpO indication between 88 and 92 inclusive.
2
• BPM indication between 57 and 63 inclusive.
• Pulse waveform of approximately 1-inch P-T-P amplitude. Actual
amplitude may vary, but can be used as a reference for high pulse
amplitude/low light patients.
8. Press the SRC-MAX %SpO
The monitor displays three dashes [ - - - ] and stabilizes at a value
between 73 and 77 inclusive. The following screen displays:
• Active audio alarm.
• Flashing %SpO
2
• BPM indication between 57 and 63 inclusive.
• Pulse waveform of approximately 1-inch P-T-P amplitude. Actual
amplitude may vary, but can be used as a reference for low pulse
amplitude/low light patients.
selection button. The SRC-MAX %SpO
2
O
%SP02
BPM
LIMITS TREND SETUP LIGHT
selection button. The %SpO
2
%SP02
BPM
LIMITS TREND SETUP LIGHT
indication between 73 and 77 inclusive.
2
M
N-600x
XI AX
90
60
?
75 LED lights.
2
O M N-600x
XI AX
75
60
?
90
2