Nellcor OxiMax N-600x Service Manual page 85

O M N-600x Service Manual
XI AX
Error Code Description
721 Battery charger error - instance #2.
722 Battery charger error - instance #3.
723 Battery charger error - instance #4.
724 Battery charger error - instance #5.
725 Battery charger error - instance #6.
726 Battery charger error - instance #7.
727 Battery charger error - instance #8.
728 Battery charger error - instance #9.
729 Battery critical without AC power.
730 Battery fail without AC power.
731 EEPROM CRC Error - EEPROM cleared.
732 Vref error on DC.
733 Vref error on AC.
734 Overtemperature (> 58 C).
735 Battery I charge.
736 Battery I discharge.
737 Temperature low.
738 Hardware failsafe occurred, maybe overtemperature.
739 Hardware failsafe occurred, maybe overcurrent.
740 Hardware failsafe occurred, cause unknown.
741 Message RX CRC error.
743 Error in the shut down sequence - occurs if the power is cycled off
and on too quickly.
Table 12: Error Codes
Troubleshooting
79