Overview; Monitor Description - Nellcor OxiMax N-600x Service Manual

Introduction

Overview

Monitor Description

4
This manual contains information for servicing the Nellcor O
pulse oximeter. Only qualified service personnel should service this product.
Before servicing the monitor, please read the O
Manual carefully for safe operation.
The N-600x monitor is intended for the continuous non-invasive monitoring of
functional oxygen saturation of arterial hemoglobin (
The N-600x is intended for use with neonatal, pediatric, and adult patients who are
well or poorly perfused, in hospitals, hospital-type facilities, intra-hospital
transport, and home environments. For prescription use only.
Note: Hospital use typically covers such areas as general care floors, operating
rooms, special procedure areas, intensive and critical care areas, within
the hospital plus hospital-type facilities. Hospital-type facilities include
physician office based facilities, sleep labs, skilled nursing facilities,
surgicenters, and sub-acute centers.
Intra-hospital transport includes transport of a patient within the hospital
or hospital-type facility.
Homecare use is defined as managed/used by a lay person (parent or other
similar non-critical caregiver) in the home environment.
Use with any particular patient requires the selection of an appropriate
O M oxygen sensor as described in the O
XI AX
Manual.
Through the use of the four softkeys, users can access trend information, select an
alarm limit to be changed, choose the language to be used, adjust the internal time
clock, and change communications protocol. The monitor can operate on AC
power or on an internal battery. The controls and indicators for the N-600x are
illustrated and identified in Figure 1 and Figure 2.
M N-600x
XI AX
M N-600x TM Operator's
XI AX
) and pulse rate.
%SpO
2
M N-600x Operator's
XI AX
TM