Nellcor OxiMax N-600x Service Manual page 14

Introduction
8
- - - PRINT
- - - BACK (back to Sensor menu)
- - TABLE (Table Menu)
- - - ^ (show previous table, only available when there is a previous
graph; bottom/top line repeats in new table)
- - - v (show next table, only available when there is a next graph;
bottom/top line repeats in new table)
- - - PRINT
- - - BACK (back to Sensor menu)
- - BACK (back to Trend menu)
- - - EXIT (to Main menu)
(Sensor/Loop Menu) (If continuous-Loop data is in the sensor, the following
displays)
- - VIEW (Sensor Trend View Menu)
- - - DUAL (shows %SPO2+BPM)
- - - SPO2
- - - PULSE
- - ZOOM (cycle through 2h, 1h, 30m, and 15m for current view)
- - PRINT
- - BACK (to Trend menu)
- EXIT (to Main menu)
SETUP (Setup Monitor Menu)
- VIEW (Setup View Menu)
- - PLETH
- - BLIP
- - TREND
- - - VIEW (RT Trend View Menu)
- - - - DUAL
- - - - SPO2
- - - - PULSE
- - - - BACK
- - - ZOOM (RT Trend View Menu)
- - - - TIME
- - - - SCALE
- - - - AUTO
- - - - BACK
- - BACK (back to Setup menu)
- SENSOR (Setup Sensor Menu)
- - DATA (On-screen options for SENSOR-R (Write-once Sensor) sensor
are: "SPO2, SPO2+BPM, DEFAULT." On-screen options for
SENSOR-RW (rewritable sensor) are: "SPO2, SPO2+BPM,
DEFAULT." SELECT toggles SENSOR-R or SENSOR-RW
sensor type; up/down keys scroll through options in order.)
The SENSOR-R feature supports all of the current
sensors.
- - - SELECT
- - - BACK (back to Setup Sensor menu)
- - - EXIT (to Main menu)
- - MSG (Sensor Set Message Menu)
- - - BACK (back to Setup Sensor menu)
- - - EXIT (to Main menu)
- NEXT (Clock/Language Menu)
- - CLOCK (Clock Menu)
- - - SET (Clock Set Menu)
O M
XI AX