Disassembling The Monitor - Nellcor OxiMax N-600x Service Manual

Disassembling the Monitor

O M N-600x Service Manual
XI AX
To disassemble the monitor:
1. Turn the monitor off by pressing the ON/STANDBY button.
2. Disconnect the monitor from the AC power source.
3. Set the monitor upside down on a static-free work surface.
Caution: Ensure the work surface is clean and free of debris.
4. Carefully set the monitor right-side up, preventing premature separation.
5. Separate the monitor's top and bottom cases, being careful not to stress the
connection harnesses between the cases.
6. Place the two halves of the monitor on the static-free work surface.
Caution: To avoid stress or damage to the power supply wiring harness,
ensure the top enclosure is lying flat on the work surface.
Disassembling the Monitor
85