Rep 8.8 Media Registration Sensor - Xerox 3050 Service Manual

REP 8.8
Sensor
Media Registration
STEP3: Use caution when removing the
xerographic module. The fuser may be
hot.
Parts List on PL 8.2
3. Remove Xerographic Module (REP 9.1).
Removal
4.
Remove Media Transport (REP 8.1).
1.
Warning: Disconnect the power cord.
I
5.
(Figure 1): Remove the Media Registration
2.
Remove the Right and Left Side Doors
I
(REP 14.1).
Sensor
Replacement
1. The replacement is a reverse of the
removal.
To avoid damage to the media
registration sensor, ensure that the
sensor is centered in the window before
tightening the screws that were
removed in step B of the removal.
GI S TRATI O N
SENSOR
REMOVE MEDIA
REMOVE SCREWS
REGI S TRATI O N
(2)
DISCONNECT
R E M O V E
SCREWS(Z)
VIEW IN REAR OF
Figure 1. Remove the Media Registration Sensor
3050 4-47
REP
8.8