Xerox 3050 Service Manual page 664

(Continued)
23. (Figure 15): Reinstall the Developer
25.
Cap the toner waste bottle and tape it to
0 STEP23A: Ensure that the developer
Module.
the toner cartridge for shipment with the
module is fully installed in the brackets.
copier.
24. Close the Upper Rear Cover and push the
Cutter in.
Q
STEP23 E: Ensure that the gear
is
free
to engage with the developer module
drive gears.
I
26: Remove and empty the moisture
collection bottle. .Reinstall the empty
bottle.
' F
%! 4
MOVE THE GEAR TO
ENGAGE
Figure 15. Reinstall the Developer Module
Removal