Rep; Registration Drive Belt - Xerox 3050 Service Manual

REP 8. t 3 Registration
Parts List
on PL 8.1
Removal
Drive Belt
REPLACEMENT
STEP3: Use caution when removing the
xerographic module. The fuser may be
Q Refer to Figure 1 in the Removal
and
hot.
ensure that the belt is installed over the
idler pulley.
3.
Remove Xerographic Module (REP 9.1).
1. Warning: Disconnect
the power
cord. 4.
Remove Media Transport (REP 8.1).
6. (Flgure 1): Remove the Media Feed Drive
Belt.
A
DISCONNECT
REMOVE THE
IDLER PULlEY
TRANSPORT DRIVE
MOTOR ASSEMBLY
Figure 1. Remove
the Media Feed Drive Belt
3050 4-57
REP
8.13