Xerox 3050 Service Manual page 394

(Continued) 2. (Figure 4): Reinstall the pins and the 3. Reinstall the following:
retaining
clip. a. Illumination Sensor (REP 6.3)
Q
STEP 2 A: Install the pins through the b. Lens Assembly (REP 6.2)
frame and into the holes in the end of
c. Exposure Lamp (REP 6. I)
the Reflector Assembly. d. Document Drive Rolls (REP 5.2)
B
REINSTALL THE RETAINER,
BRACKET, AND SCREWS (2)
Figure
4.
Reinstall
the
pins
and the retaining clip
3193
REP 6.4
4-22
3050