Xerox 3050 Service Manual page 519

(Continued)
STEP 5
C:
The leading edge mark made
.
In the step
2
must be at the edge of the
Q
STEP 5 A: Before inserting the
feed-in shelf or beyond.
document, read steps B and C in figure
2. The check will be made while the
5. (Figure 2): Check the trail edge position
document
is
moving. and the lead edge position..
Q
STEP 5 B: The trailing edge mark made
in the step 2 must be at the edge of the
upper rear door or beyond.
CHECK THAT THE DOCUMENT STOPS
WlTH THE MARK ALIGNED WlTH OR
BEYOND THE EDGE OF THE UPPER
UPPER 'OVER REAR COVER BEFORE IT REVERSES
I
INSERT THE DOCUMENT
' 1 "
CHECK THAT THE DOCUMENT
STOPS WlTH THE MARK
ALIGNED WITH OR BEYOND
THE EDGE OF THE FEED-IN
SHELF BEFORE IT REVERSES
FEED-IN SHELF EDGE
Figure 2. Check the trail edge position and the lead edge position
(Continued)
ADJ 5.2 (W/ Tag/ MOD 2)