Xerox 3050 Service Manual page 555

SYMBOLOGY
An item number within an unshaded box shows that the part has a An item number within a shaded box and an unshaded box shows
procedure in the Repairs Section (Figure 2). Check the pro- that the part has an adjustment procedure and a repair procedure
An alpha character within a circle with a line coming from it is
cedure for the correct sequence of repair, for warnings, for cau- (Figure 3). Check the Repairs Section and Adjustment Section
used to denote a broken explode line. Two such circles on an tions, for notes, and for other special conditions. for more information.
exploded view depict the beginning and the finish of the broken
portion of the explode lines.
The following symbols are used in the parts list sections of the
documentation.
An item number within a shaded box shows that the part has an
adjustment procedure (Figure
1).
Check the Adjustment Section
for the specification or procedure.
Figure 2. Repair Symbol
Figure 1. Adjustment Symbol
Figure 3. Adjustment and Repair Symbol
PARTS LIST SECTION
INTRODUCTION