Xerox 3050 Service Manual page 451

STEP 1:
Before
installing
the
photoreceptor drum, reform the
photoreceptor seal so that it is
pointing to the charge corotron.
Replacement
Cover the photoreceptor drum with
a
light shield in order to prevent
damage.
1. (Figure 2): Reinstall the Photoreceptor
Assembly.
(Continued)
'
RIGHT END VIEW
INSTALL DRUM ASSEMBLY
BEARING WlTH RING
POSITIONED AGAINST THE
OUTSIDE SURFACE OF FRAME
PLACE OTHER END OF
THE DRUM ON THE
SCREWDRIVER HANDLE
MOVE ASSEMBLY FULLY
TO SEAT BEARING WITH
RlNG POSITIONED
AGAINST OUTSIDE
SURFACE OF FRAME
4/96
3050 4-678
REP 9.2 B