Rep 9.4 - Xerox 3050 Service Manual

REP 9.4 Cleaner Blade
Parts List on
PL 9.5
Removal
1.
Warning: Disconnect the power cord.
2. Remove the Xerographic Module (Rep
9.1).
B
Q
REMOVE THE
TRANjITION GEAR
3. Remove Photoreceptor Drum Assembly (REP 5. (Figure 2): Remove the Cleaner Blade
9.2). Assembly
0
STEPS 4 A AND B: Use care when
removing the retainer and the transition
gear. The cleaner blade assembly is
spring-loaded.
4. (Figure 1): Remove Transition Gear and
Weight.
. .
-
&
REMOVE
THE SPRING
REMOVE THE CLEANING
BLADE ASSEMBLY
Figure 1 . ' Remove the Transition Gear and
Weight
Figure 2. Remove the Cleaning Blade Assembly
(Continued)
REP 9.4