Rep 7.1 Roll Supply Drawer - Xerox 3050 Service Manual

REP 7.1 Roll Supply Drawer
Parts List on PL 7.1
Removal
0
All three Roll Supply Drawer Assemblies
are removed the same way. Roll supply
Drawer Assembly three (3) is shown.
1. Warning: Disconnect the power cord.
2. Open the Media Supply Doors.
3. Pull the Roll Supply Drawer out and remove
the roll of media.
4. (Figure 1): Remove the Roll Supply Drawer.
A
REMOVE SCREWS (4)
TWO EACH END)
B
REMOVE THE ROLL
SUPPLY DRAWER
Figure 1. Remove the Roll Supply Drawer
3193
3050 4-23
REP 7.1