Xerox 3050 Service Manual page 250

2.1 Control Panel RAP
(214193)
Initial Actions
Procedure
This RAP is used when the Control Panel does
Ensure that Control Console harness Refer to the table on the next two pages.
not operate, or operates incorrectly.
I
Connector A32 PI l l is seated fully.
Ensure that Connector A3 P301 on the
NOTE: The circuit diagram is on the
following pages.
Control PWB (A3) is correctly installed
and seated fully.
A3 P301
CONTROL PWB (A3)
0
CONTROL CONSOLE
P L 1.4
2.1 Control Panel RAP