Xerox 3050 Service Manual page 544

ADJ 10.2 FUSER TEMPERATURE
(With Probe)
PURPOSE
The purpose i s to adjust the fuser roll
temperature to maintain the correct copy
fusing.
0
Ensure that the fuser thermistor, RTI,
is in positive contact with the fuser roll.
Q This procedure must be performed
after the machine becomes ready.
HOW T O SET U P TEMPERATURE PROBE 2. (Figure 2): Connect the Temperature
1. (Figure 1): Connect the Thermal Sensor to
the~em~erature Probe.
q'
THERMAL SENSOR
probe to the DMM.
Figure 1 . Connect the Thermal Sensor to the
Temperature Probe
JACK
TEMPERATURE PROBE
Figure 2. Connect Temperature Probe t o DMM
(Continued)
ADJ 10.2