(Continued)
Note the location of the individual
module connecton in the housing
before removing them. This will ensure
that they are reinstalled correctly after
the repair to the terminals is complete.
Failure to locate the individual
connectors correctly will cause the copier
to misfunction causing damage.
STEP2 8: Use caution when forcing the
housing body away from the module
connector. Too much force could cause
damage to the housing body.
2. (Figure
2): Remove the individul module
connectors from the housing.
ENSURE THAT THE
TABS ON THE
HOUSING ARE
.. .
f c
MOVED CLEAR OF
THE MODULE
CONNECTORS
D
t
REMOVE THE
MODULE
CONNECTORS
MODULE CONNECTORS
Figure 2. Remove the indlviduel module connectors from the housing
(Continued)
10192
3050
6.1 5
Molex Connector Repair Procedure