Xerox 3050 Service Manual page 445

(Continued) 13. (Figure 9): Set the Xerographic Module
1
on
the Service Rails in
Position A or B.
STEP 13 A: The pins (2) on the
Xerographic Module must be
positioned in the dots
(2)
on
the
Service Rails (2). The Xerographic
Module is secured correctly when
the
pins are positioned in the
slots.
POSITION A
XEROGRAPHIC
MODULE
ENSURE THAT THE PINS (2)
ARE POSITIONED I N THE
SLOTS (2) ON BOTH
SERVICE RAILS
POSITION B
E THE XEROGRAPHIC
LE 90 DEGREES
C
SERVICE
ENSURE THAT THE MODULE
REST O N THE RAlLS FULLY
RAIL
I
R
Figure 9. Position the Xerographic Module on the Service Rails
REP 9.18