Xerox 3050 Service Manual page 644

(Continued)
37. (Figure 29): lnstall the Document
separator.
36.
(Figure
28): US0
only: Remove the
protective covering from the Control
Console.
RX only: Install the Control Console label.
US0 ONLY: REMOVE THE
TRANSPARENT PROTECTIVE
COVERING
RX ONLY: INSTALL THE CONTROL
CONSOLE LABEL
Figure
20. US0
only: Remove the
transparent protective covering
RX
only: lnstall the Control
Console Label
ENSURE THAT THE
NUTS ARE LOOSE
ROTATE THE
OOCUME NT FEED IN
E
ROTATE THE FEED IN
F-
SHELF OVER AGAIN
ROTATE THE FEED IN
AND TIGHTEN THE
SHELF BACK AND
NUTS (4)
SECURE
Figure 29. lnstall the Document Separator
(Continued)
10192
Installation
6-42
3050