Xerox 3050 Service Manual page 549

ADI 14.1 Level the Copier
Purpose
The purpose of this adjustment i s to level the
copier in
an
non-twisted condition.
Check
1. Check and ensure that the castors are
adjusted fully up (copier at the lowest
position).
STEP 1A: To avoid damage to the
hinges on the upper rear door, pull the
cutter out to support the upper rear
door.
2. (Figure 1): Lower the Upper Rear Door
MOVE THE
LATCHES
..
-
PULL THE CUTTER
OUT WHILE DOING
THE STEP B
Figure 1. Lower the Upper Rear Door
(Continued)
3/93
4-149
ADJ 14.1