Rep 7.8 Rewind Housing - Xerox 3050 Service Manual

REP 7.8
Rewind Housing
4. (Figure 1): Remove the Rewind Housing.
Replacement
Parts List on PL 7.2
Removal
1. Warning: Disconnect the power cord.
(
2. Remove the
Left Side Door
(REP 14.1).
3, Remove the following:
a. Rewind Clutch (CL 1,3,S) (REP 7.6)
b. Motion Sensor (REP 7.7)
A
DISCONNECT
REMOVE THE
B'
REMOVE
SCREWS (3)
1. Reinstall the following:
a. Rewind Housing
b. Motion Sensor (REP 7.7)
c. Rewind Clutch
(CL 1,3,5)
Figure 1. Remove the Rewind Housing
3193
REP 7.8
4-30 3050