Rep 9.7 - Xerox 3050 Service Manual

REP 9.7 Developer Material
2. Remove the Developer Module (REP 9.5).
3. Place the Devel oWr Module on a drop
cloth on the floor.
Parts List
(Refer to Supplemental Tools and
Do not rotate the Developer Module in
Supplies, Machine Consumables in Section 6.)
the vertical position. rhjs
may
cause
4.
(Figure
1):
Remove the Sump Shield from
developer to get into the toner the Developer Module-
Removal
cartridge clutch in the end o f the
Developer Module.
1 . Warning: Disconnect the power cord.
(Continued)
LEDGE (FULL LENGTH)
Figure 1. Remove
the
Sump Shield from
the
Developer Module
REP 9.7