Xerox 3050 Service Manual page 616

Molex SLConnector Repair Procedure
I . (Figure 1): Molex Extraction Tool.
Purpose
The purpose of this procedure
is
to show the
approved method of repair or replacement of
the wire terminals in either the Pin Housing
Connectors or the Socket Housing Connectors
without damaging them.
The Molex connectors will break easily.
Use only approved tools and procedures
when extracting modules or terminals or
resetting the terminal locking tabs.
Items Required
600T1825 Extraction Tool
THlS HOOK IS USED TO
REFORM THE LOCKING
TAB ON THE PIN BEFORE
REINSERTING THE PIN
INTO THE CONNECTOR
THESE FLAT TABS AND
EXTENDER ARE USED TO
REMOVE THE INDIVIDUAL
MODULE CONNECTORS FROM
WITHIN THE HOUSING
\
THlS PROTRUDING TAB IS
USED TO RELEASE THE
1
HIS PROTRUDING TAB
IS
USED TO RELEASE THE
FLAT TABS
LOCKING TABS ON THE
LOCKING TABS ON THE PINS
PINS WHILE THE
WHEN THE INDIVIDUAL
INDIVIDUAL MODULE
CONNECTORS REMAIN IN
MODULE CONNECTORS ARE
REMOVED FROM THE
THE HOUSING HOUSING
'EXTENDER
Figure 1. Molex Extraction Tool
(Continued)
10192
Molex Connector Repair Procedure
6-1 4 3050