Xerox 3050 Service Manual page 539

(Continued)
STEP3 0: To avoid damage to the drive
plate seal, always rotate the drive plate
in the direction shown in Figure 4.
3. (Figure 4): Reinstall the Cartridge Drive
Plate.
INSTALL THE
CARTRIDGE DRIVE
PLATE
\
C
'
INSTALL THE RETAINER
SCREWS (2)
Figure
4.
Install the Cartridge Drive Plate
0
STEP4 C: Do not overtighten the screws.
4. (Figure 5): Reinstall theTop Shield.
U
INSTALL SCREWS
(2)
INSTALL THE
TOP SHIELD
Figure 5. Reinstall the Top Shield
5 .
Reinstall the following:
a. Toner Cartridge
b. Developer Module
ADJ 9.5