Xerox 3050 Service Manual page 632

(Continued)
10. (Figure 12): Lower the copier to the lowest
position.
ROTATE SCREWS
FULLY COUNTER
CLOCKWISE
Figure 12. Lower the copier to
the lowest position
(Continued)
1 1.
(Figure 13): Check the Level of the Copier.
STEPS 11
A
and 8: To ensure that the 12. Determine on which side of the copier the
copier is not twisted, perform the front-
front-to-back level is the farthest out of
to-back check on the frame at the ends
level.
of the copier.
STEPS
1 1 A
and
6:
The bubble must be
centered between the lines on the level.
CHECK THE FRONT TO
BACK LEVEL
REPEAT THE FRONT-TO-
C
BACK LEVEL CHECK ON
CHECK THE SIDE-TO-SIDE
THE OTHER END OF THE
LEVEL
COPIER
Figure 13. Check the b v e l of the Copler
(Continued)
016298
10192
Installation
6-30 3050