Xerox 3050 Service Manual page 505

REP 10.8 Stripper Fingers
Parts List on PL 10.4
Removal
1 . Warning: Disconnect
the power cord.
Handle the Stripper Finger Assembly
with care in order to avoid bending the
stripper fingers.
REMOVE THE
'
tA
STRIPPER
Figure
1.
Remove the Stri er Fin srs P * I
WARNING:
The fuser roll may be hot.
2. Remove the Stripper Finger Assembly (REP
10.6)
3. (Figure 1): Remove the Stripper Fingers.
INSTALL THE STRIPPER
FINGER
Replacement
STEP 1 B:
To avoid damage
to
the
stripper fingers, do not bend them too
far causing them to fold.
1. (Figure 2): Install the Stripper Fingers.
2.
The remainder the the replacement is a
reversal of the removal procedure.
D
9LIGN
THE TABS
(EEP THE STRIPP
VNGER STRAIGH
Figure 2. Install the Stripper Fingers
3/93
3050 4-109
REP 10.8