Xerox 3050 Service Manual page 551

(Continued)
3. (Figure 4): Adjust the Side-to-side levef.
Adjust
1. Adjust the side which is the farthest out of
specification first.
Q
STEPS I A and 2 8: the bubble must be
centered between the lines
on
the
le vet.
2. (Figure 3): Adjust the Front-to-back Level.
SCREWS TO
A ON THE OTHER
ADJUST THE LEVEL
END OF THE
O F THE COPIER COPIER
Figure
3.
Adjust the Front-to-back Level
4. Perform Steps 3 and 4 of the Check.
5. Perform
Steps
1 and 2 of the Adjust
until
the
level is within specification.
ADJUST THE HEIGHT
OF
THE COPIER WHILE
DOING THE STEP B
3 B -
LEVEL THE
COPIER
Figure 4. Adjust the Side-to-side Level
3/93
3050
4-1 51
ADJ 14.1