Dir - Dell C9000 Series Reference Manual

3 -rwx 8388608 Jun 25 2015 14:54:52 +00:00 50mb
usbflash: 3996688384 bytes total (3988295680 bytes free)

dir

Display the files in a file system.
C9000 Series
Syntax
dir [filename | directory name:]
From a PE console, use dir {flash:filename/path | usbflash: filename/
path }
Parameters
filename |
directory name:
flash: | usbflash:
Defaults The default is the current directory.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
(OPTIONAL) Enter one of the following:
• For a file or directory on the internal Flash, enter flash://
then the filename or directory name.
• For a file or directory on an NFS mounted file system, enter
nfsmount:// followed by the mount point and file path.
NOTE: While displaying a file directory on a remote
NFS file system, it is mandatory to specify the
mount-point that indicates the working directory
on the NFS file system. You cannot display details
corresponding to the root directory of the remote
NFS file system.
• For a file or directory on the external Flash, enter
usbflash:// then the filename or directory name.
For PE Console.
Enter one of the following:
• For a directory or file on the internal Flash, enter flash://
then the directory name or filename and the path.
• For a directory or file on the external Flash, enter
usbflash:// then the directory name or filename and
the path.
File Management 209