Upgrade - Dell C9000 Series Reference Manual

boot system rpm0 default system: A:
boot system rpm1 primary system: A:
boot system rpm1 secondary ftp://ftp:ftp@10.11.227.233/tftpboot/
FTOS-VG-1-0-0-4046.bin
boot system rpm1 default system: A:
boot system gateway 10.11.93.254
!
service timestamps log datetime
!
logging coredump
!
hostname Dell
! protocol lldp
!
feature extended-bridge
!
redundancy auto-failover-limit count 3 period 60
redundancy auto-synchronize full
redundancy disable-auto-reboot rpm
!
Related show running-config
Commands

upgrade

Upgrade the bootflash, bootselector, or Dell Networking OS (system) image on the switch CPUs.
C9000 Series
Syntax
upgrade {bootflash—image | bootselector-image| system—image} [all |
linecard [slot-id |all] [pe pe-id {stack-unit unit-number}] | rpm{0|1}
{booted | flash: | ftp: | rpmA:| rpmB:| scp:| tftp: | usbflash:}
Parameters
bootflash-image
bootselector-
image
system-image
all
linecard slot-id
– displays the current (running) configuration.
Enter the keyword bootflash-image to upgrade the bootflash
image on the switch CPUs.
Enter the keyword bootselector-image to upgrade the
bootselector image on the switch CPUs. Use this option only with
TAC supervision.
Enter the keyword system-image to upgrade the boot OS image
stored in cache memory of the switch CPUs.
Enter the keyword all to upgrade the bootflash and bootselector
images on the switch CPUs.
Enter the keyword linecard and specify the linecard slot-id . The
linecard slot id range is from 0 to 11. Enter linecard all to select all
linecards.
File Management 233