Util-Threshold Cpu - Dell C9000 Series Reference Manual

Version
9.2(1.0)
8.1.1.0
7.5.1.0
Usage Information Trace log information is uploaded to flash:/TRACE_LOG_DIR.

util-threshold cpu

Configure the high or low CPU utilization thresholds for SNMP traps.
C9000 Series
Syntax
util—threshold cpu {5sec | 1min | 5min} {all | cp |lp slot–id | pe
| rp} {high {0-100} | low {0-100}}
Parameters
cpu-utilization-
time
cp
rp
lp slot-id
pe
all
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Enter one of the following values to configure the threshold
level for the time in which a switch CPU can be used:
• 5 sec
• 1 min
• 5 min
Enter the keyword cp to configure the CPU utilization time for
the Control Processor CPU.
Enter the keyword rp to configure the CPU utilization time for
the Route Processor CPU.
Enter the keyword lp and the linecard processor (lp) slot-id for
which you want to configure the CPU utilization time. The range
for lp slot-id is from 0 to 11.
Enter the keywordpe to configure the CPU utilization time for
port extenders (PE) configured in the system. Range is from 0 to
255.
NOTE: The pe option is only available when the
extended bridge feature is enabled.
Enter the keyword all to configure the CPU utilization time on
all switch CPUs: Control Processor, Route Processor, port
extender (PE) and line cards.
Control and Monitoring 194