Triumph Rocket III Classic Service Manual page 410

Fuel System/Engine Management
12. Release the left hand fixing securing the exhaust link
box to the frame.
~---
1. Left hand fixing
2. Exhaust link box
13. Release the clamp securing the exhaust link box to
the exhaust header. Release the right hand fixing
and remove the exhaust link box.
!tJJ1J))
"""
1.
Clamp
2. Right hand fixing
14. Remove and discard the exhaust link box gasket.
15. Remove the lower heat shield from the exhaust
headers.
16. Remove the upper heat shield from the headers.
After removal, collect the small rubber isolators from
the brackets on the inner heat shield (or on a tag on
the end of the upper shields, depending on where
they are retained).
3
W
&---
"'"
1. Inner heat shield
2. Isolator brackets
3. Isolators
4. Upper heat shields
lZ At the cylinder head, release the nuts securing the
header pipes to the head.
~ ~rL1C-'~
,0
-~
Jttl
I
2
1. Flxlngs
2. Header cover
3. Header downpipe
18. Detach and remove the header assembly.
19. Collect the header covers and the header gaskets
from the head.
11.206
SelVice Manual - Rocket III / Classic / Touring
(