Installation - Triumph Rocket III Classic Service Manual

Frame and Bodywork
9. Release the fixings securing the mudguard brace to
the mudguard.
cccv
1. Mudguard
2. Mudguard brace
10. Detach the brace from within the mudguard.
11. The rear light, number plate light and indicators may
all be removed by releasing the mounting plate,
behind the rear lamp, inside the mudguard.
Installation
1. Locate the mudguard brace to the inside of the
mudguard.
2. Fit and tighten the M6 x 12 mm fixings to
9 Nm.
3. If removed, refit the rear light, number plate light
and indicators to the rear mudguard. lighten the
fixings to
9 Nm.
1. Rear light fixings
4. Locate the mudguard to the frame, positioning the
locating arms above the frame cross tube.
5. Pivot the mudguard upwards at the rear and engage
the two M6 x 16 mm fixings through the frame and
into the mudguard.
-=
1. Fixing
6. Tighten the fixings to 5 Nm.
Z Position the mudguard covers, engaging their
forward edges to the grommets.
1. Cover
2. Grommet
17.26
SelVice Manual - Rocket Ill/ Classic / Touring