Crankshaft
Note:
•
The liners have a large chamfer at the bottom
of the bore, enabling fitting of the piston
without the need for a piston ring compressor.
Fit each liner over whichever piston is at TDe. When
turning the engine, do not allow the pistons to contact
the inside of the crankcase and also do not allow fitted
liners to lift off the crankcase base.
5.
Continue fitting each liner in turn until all are fitted
and sealed.
Note:
•
When the liners have been fitted, they should
not be disturbed. If it is necessary to remove
the liner after fitting, the sealer must be re-
applied.
5.22
SelVice Manual- Rocket Ill/ Classic / Touring