Table of Contents
Advertisement
Brakes
Front Brake Master Cylinder -
Rocket III Touring
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1.
Remove the seat (see page 17-18>.
2.
Disconnect the battery negative (black) lead first.
"
To prevent paint damage, do not spill brake fluid onto
any area of the bodywork.
Spilled brake fluid will
damage paintwork.
3.
To drain the fluid from the master cylinder, attach a
tube to the right hand caliper bleed nipple, slacken
the nipple and operate the brake lever until all fluid
has been expelled into a suitable container.
4.
Disconnect the brake hose and brake light switch
connections to the master cylinder.
cars
1. Brake hose connection
2. Brake light switch connection
5.
Release the clamp screws from the handlebar to
remove the master cylinder.
o
cert
1.
Clamp screws
Disassembly
1.
Remove the pivot locknut and bolt securing the
brake lever to the master cylinder.
2.
Remove the brake lever and spring.
1.
Brake lever
2. Spring
15.24
Service Manual- Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
