Triumph Rocket III Classic Service Manual page 356

Fuel System/Engine Management
Z Release the two fixings from the front of the fuel
tank.
I. Fixing.
8.
Pivot the fuel tank upwards at the front and support
the tank while detaching the tank prop from two
clips on the outside of the coil bracket.
I
I. Coil bracket
2. Fuel tank prop
9. Locate the plain end of the prop in a fuel tank fixing
hole and the spherical end in the fixing bracket on
the tank.
I.
Fuel tank fixing hole
2. Prop - plain end
3. Prop - ball end
Fuel tank - lowering and securing
1.
2.
Support the tank and remove the tank prop.
Continue to support the tank while refitting the prop
to the two clips on the outside side of the coil
bracket.
I. Coil bracket
2. Fuel tank prop
3. Lower the tank into position and secure with the
forward two fixings. lighten the fixings to
11
Nm.
4. Refit the intake cover as follows, align the cover to
the centre and rear supports and ease it into place.
Fit and tighten the screw to
9
Nm.
5. Ensure the electrical connector gasket is in place and
connect the electrical connector to the instrument
assembly. Slide the protective cover over the
connector.
6.
Refit the instrument assembly and tighten the fixings
to 7 Nm.
Z Reconnect the battery, positive (red) lead first.
8. Refit the seat (see page 17-18).
11.152
SelVice Manual - Rocket
1111
Classic
1
Touring
(
(
(