Table of Contents
Advertisement
Frame and Bodywork
6.
Trace the wiring back from the number plate light,
rear indicators and rear light assembly and
disconnect their wiring connectors from the main
harness. The connections will be near to the engine
management ECU on the right hand side of the
motorcycle.
1.
Wiring connections
Note:
•
Prior to disconnection, note the relative
locations
of the
wires
to
their
mating
connectors.
Z
Release the two fixings from each side of the rear
mudguard cover.
1.
Rear mudguard cover fixings
Note:
•
After removal of the mudguard covers, the
mudguard will not detach from the frame.
8.
Detach the mudguard covers from the both sides.
The covers locate in a grommet at their forward
edge.
1.
Mudguard cover
2. Grommet
9.
Support the rear mudguard then release the
remaining fixings (one per side) that secure the rear
mudguard to the frame.
-=
1.
Mudguard fixings
17.28
SelVice Manual- Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
