Triumph Rocket III Classic Service Manual page 457

8. Remove the spacer, spring cap and spring.
cbol
1.
Spacer
2. Spring cap
3. Spring
9. Holding both the outer and inner tubes together,
invert the fork and pour out the fork oil into a
suitable container. Pump the damper rod to remove
all oil.
10. Return the fork to the vice, clamping it as before.
11. Separate the inner and outer tubes leaving the dust
and oil seals in place in the outer tube.
cborn
1. Inner tube
2. Outer tube
Front Suspension
12. Remove the damper rod locknut then insert the
square end of tool 3990090-T0301 over the damper
rod and engage the square in the damping cylinder
cup inside the fork. Hold the hexagonal end of the
tool to prevent the cylinder from turning while
removing the damper bolt from the bottom of the
fork.
1. Tool 3880090-T0301
2. Damping cylinder
13. Remove the tool, then the damping cylinder from
the inner tube.
cbon
1. Damping cylinder
2. Inner tube
SelVice Manual - Rocket 1111 Classic 1 Touring
14.15