Triumph Rocket III Classic Service Manual page 372

Fuel System/Engine Management
36. Noting their orientation, release the two clips
securing the intake plenum to the intake duct.
1. Intake plenum
2. Intake duct
3. Clips
3Z Release the two screws securing the intake plenum
to the throttle bodies.
1. Screws
38. Carefully detach the intake plenum from the throttle
bodies and intake duct. Place the intake plenum
aside.
39. Release the clip securing the intake hose to the
intake duct.
""
1. Intake hose
2. Intake duct
3. Clip
40. Disconnect the manifold absolute pressure (MAP)
and air temperature sensors.
1. MAP sensor
2. Air temperature sensor
3. Connectors
Note:
• Prior to removing the intake duct, the MAP
sensor hose must be disconnected.
11.168
Service Manual - Rocket Ill/ Classic / Touring
(
(
\