Triumph Rocket III Classic Service Manual page 254

Fuel System/Engine Management
15 STORED DTes
5 T OR EO o T [ 5
a T [
[
0 U N T 02
? P o 7
7
7
•
TP
02 o 7
~
.
I~~
93JU \
The second line - 'DTC COUNT', shows the number of
DTC's stored in the ECM memory.
lines 3 and 4 display up to two of the DTCs stored (if
any). If additional DTCs are stored, this will be indicated by
a downward pointing arrowhead, and it/they can be
accessed using the 'Up' and 'Down' keys.
If there are no DTCs shown, press the Return key
(J)
to
return to MAIN MENU.
(If DTCs are present when the Return key is pressed,
display will read 'STORED DTCS ERASE ALL DTC DATA
YES/NO').
Information about each DTC can be obtained by scrolling
the text until the appropriate code is opposite the '?' in
line 3; then press the Help key W.
DTC example:
POII7
Help text:
I'IRP SENSOR
LOLl 1I0LTRGE
Press the Validation key
'*'
to continue (operation 16).
IMPORTANT:
If a OK has an asterisk (') to its right, this indicates that a
snap shot of engine data at the time the DTC was stored is
available to aid your fault diagnosis. To access this
information, press the Validation key
'*'
to go to
operation 16 and open 'FREEZE FRAME DATA'.
16 Three options are now available:
5 T OR Ea
a T [ 5
T
F R E E Z E F R R f'I E a R T R
[
L
E R R
a T [ 5
~
g.,
I~(
Align 'FREEZE FRAME DATA' with the cursor, and press
the validation key
'*'
to display 'FREEZE FRAME'
(operation
/7). .
Align 'CLEAR DTCS' with the cursor, and press the
validation key
'*'
to display 'ERASE ALL DTC DATA'
(operation 19).
Press the Return key
(J)
to go back to 'STORED DTCS'
(operation 15).
11.50
Service Manual - Rocket Ill/ Classic / Touring