Triumph Rocket III Classic Service Manual page 250

Fuel System/Engine Management
7 UNLOCKECM
UN L 0
[ K
E [ U
UN L 0
[ K
E [ Ui'
~
[ 0 N F I RfI
'I'
[R
N
[ E L
Use the 'Up' and 'Down' keys to position either
'CONFIRM' or 'CANCEL' opposite the cursor.
If 'CONFIRM' is selected, press the Validation key '*' to
unlock the ECM. (Operation 8) will be displayed.
If 'CANCEL' is selected, the 'MAIN MENU'
(Operation 1O.l will be displayed. Note that if cancel is
selected, the ECM will remain locked until the ECM
unlock sequence is carried out, but all other diagnostic
data will be available.
8 UNLOCKECM
UN
L 0
[ K
E [
U
'I'
5 5 5 5 5 5 5 5
Enter the numeric password supplied by Triumph using
the 'Up' and 'Down' keys as described below.
The number '55555555' is displayed, with the cursor
pointing down at the first digit.
Press the 'Up' or 'Down' keys to change this digit to the
first digit of the numerical password.
Press the Validation key'*'.
The cursor will now re-position over the second digit '5'.
Enter the second digit of the number in the same way.
Continue until all 8 digits of the number have been
entered.
Note:
• If
any digit has been entered incorrectly, press
the 'Return' key
(J)
to start again.
When all 8 digits have been entered correctly, press the
Validation key '*'.
If the numerical password entered is invalid, the screen
shown in operation 9 will be displayed.
If the numerical password entered is valid, the screen will
display 'ECU SUCCESSFULLY UNLOCKED'. The ECM is
now unlocked, and the engine can be started.
Note:
• Each new Triumph model will have a unique
pass code (i.e. all 2007 model year Rocket '" (
Touring motorcycles will have the same pass
code>. The pass code will be released via
'Triumph On Line' on a pre-arranged date. The
specific date when this code will be released
will vary from model to model.
11.46
SelVice Manual - Rocket 1111 Classic I Touring