Triumph Rocket III Classic Service Manual page 462

Front Suspension
5. Pivot the instruments forward to reveal the
handlebar clamp bolts.
6. Support the handlebar then unscrew the bolts and
lift off the handlebar clamp, together with the
instruments. Protect the top of the fuel tank from
accidental damage and then lay the instruments and
clamp on the fuel tank.
1.
Handlebar clamp bolts
7. Position and support the handlebar clear of the top
yoke, ensure the master cylinder remains in an
upright position.
8. For Rocket III and Classic models up to VIN 241596
continue from step 13.
Rocket III and Classic models from VIN 241570
9. Remove the chrome cover from the instrument
bracket.
1.
Chrome cover
10. Release the two fixings securing the instrument and
bracket assembly to the handlebar clamp and slide
the instrument assembly free. Protect the motorcycle
from damage and position the instruments clear of
the handlebar.
1.
Instrument bracket
2. Fixings
11. Support the handlebar then unscrew the four bolts
and lift off the handlebar clamp.
1.
Handlebar clamp
2. Fixings
12. Position and support the handlebar clear of the top
yoke, ensure the master cylinder remains in an
upright position.
All models
Note:
• When the top yoke is removed (below), the
steering lock and headlights will also be
removed as part of the assembly.
14.20
SelVice Manual- Rocket 1111 Classic I Touring