Triumph Rocket III Classic Service Manual page 193

2. Position the scavenge pump to the crankcase and
engage it to the mounting dowels. Ensure the drive
blade is facing towards the front of the engine.
1.
Mounting dowels
3. Fit and tighten new scavenge pump screws to
12Nm.
1
®
7
1.
Scavenge pump screws
Lubrication
4. Position the pressure pump and spray bar to the
crankcase, aligning the drive blade on the scavenge
pump with the drive slot on the pressure pump.
1.
Scavenge pump - drive blade
2. Pressure pump - drive slot
5. Clean and examine the mesh filter for the pressure
pump before refitting it to the crankcase. Replace the
filter if blocked, split or damaged in any way.
1. Mesh filter
6. Fit and tighten the pressure pump and spray bar
screws to 12 Nm.
Z Assemble the crankcase halves (see page
5-8>.
SelVice Manual- Rocket Ill/ Classic / Touring
9.15