Triumph Rocket III Classic Service Manual page 376

Fuel System/Engine Management
14. Arranging the cables to the rear of the ECM bracket
as noted prior to removal, refit the ECM bracket and
tighten its screws to
3 Nm .
•
-.
1. ECM bracket
2. Cables
15.
locate the ECM to its bracket and tighten its screws
to
5 Nm.
16. Reconnect both multi·plugs to the ECM.
lZ For Rocket III and Classic, continue from step 22.
Rocket III Touring
18. On the right hand side, fit the relay and socket to the
mounting point on the battery box. Ensure that the
relay is fully engaged on its mounting.
1. Relay
2. Battery box
19. Arranging the cables to the rear of the ECM bracket
as noted prior to removal, refit the ECM bracket and
tighten its screws to
3 Nm.
1. ECM bracket
20. Reconnect both multi-plugs to the ECM.
21. Attach ECM its bracket and tighten the screw to
SNm.
1. Screw
2. ECM retaining bracket
All Models
22. Reconnect the barometric pressure sensor.
""
1. Barometric pressure sensor
11.172
Service Manual - Rocket Ill/ Classic / Touring
(
(