Triumph Rocket III Classic Service Manual page 379

(
Intake Air Temperature Sensor
Removal
1.
Remove the seat (see page 17-17 for Rocket III and
Classic, see page 17-18 for Rocket III Touring).
2. Disconnect the battery, negative (black) lead first.
3. Raise and prop the fuel tank (see page 1/-147 for
Rocket III and Classic, see page 11-151 for Rocket III
Touring).
4. Disconnect the electrical multi-plug from the sensor.
1. Air temperature sensor
2. Multi-plug
5. Unscrew the sensor from the intake duct.
Installation
1. Fit the sensor to the intake duct and tighten to
3Nm.
2. Reconnect the multi-plug.
3. Support the tank, remove and stow the tank prop,
then lower the tank to the frame and secure it (see
page 11-149 for Rocket III and Classic, see page 1/-
152 for Rocket III Touring).
4. Reconnect the battery, positive (red) lead first.
5. Refit the seat (see page 17-17 for Rocket III and
Classic, see page 17-18 for Rocket III Touring).
Fuel System/Engine Management
Manifold Absolute Pressure (MAP)
Sensor
Removal
1.
Remove the rider's seat (see page 17-17 for Rocket III
and Classic, see page 17-18 for Rocket III Touring).
2. Disconnect the battery, negative (black) lead first.
3. Raise and prop the fuel tank (see page 1/-147 for
Rocket III and Classic, see page 11-151 for Rocket III
Touring).
4. Disconnect the electrical mUlti-plug from the sensor.
1. MAP sensor
2. Multi-plug
5. Unscrew the bolt securing the sensor to the intake
duct.
6. Raise the sensor in order to disconnect the hose
from below it.
Installation
1. Fit the sensor to the intake duct, reconnect the hose
and tighten the bolt to 3 Nm.
2. Reconnect the multi-plug.
3. Support the tank, remove and stow the tank prop,
then lower the tank to the frame and secure it (see
page 11-149 for Rocket III and Classic, see page 1/-
152 for Rocket III Touring).
4. Reconnect the battery, positive (red) lead first.
5. Refit the seat (see page 17-17 for Rocket III and
Classic, see page 17-18 for Rocket III Touring).
Service Manual - Rocket Ill/ Classic / Touring
11.175