Triumph Rocket III Classic Service Manual page 191

3. Prevent the oil pump drive sprocket from turning
using a hand-hold only. Remove the locknut from
the drive sprocket shaft.
1. Drive sprocket shaft
2. Locknut
4. Remove the pump sprocket, drive sprocket and
chain as one item by sliding them forward.
5.
Note the position of the spray bar before releasing
the bolts securing the pressure pump and spray bar
to the crankcase. Withdraw the pressure pump and
spray bar.
1. Pressure pump bolts
2. Spray bar
Lubrication
6. Recover the mesh filter situated between the
pressure pump and crankcase.
1. Mesh filter
Z Separate the crankcase halves (see page 5-.5).
8. Release and discard the screws that secure the
scavenge pump to the lower crankcase.
1
®
7
1. Scavenge pump screws
9. Ease the pump from its dowels and withdraw it from
the crankcase.
1. Scavenge pump
SelVice Manual - Rocket Ill/ Classic / Touring
9.13