Triumph Rocket III Classic Service Manual page 370

Fuel System/Engine Management
20. Ease the two relay connectors rrom the battery box
by pushing them upwards.
"' "
1. Relays
2. Battery box
21. Disconnect the barometric pressure sensor.
"'"
1. Barometric pressure sensor
22. Lay the relays, ECM connectors and other wiring
aside.
23. Release the two screws securing the seat lock to the
rrame, then lay the seat lock (still attached to its
cable) to one side.
'"'"
1.
Seat Lock
2. Screws
24. Release the two screws securing the battery box
assembly to the rrame.
1. Battery box
2. Screw (left hand shown>
25. Manoeuvre the battery box assembly rrom the
motorcycle and place aside.
26. For Rocket III and Classic, continue rrom step 35.
Rocket III Touring
Note:
• Before proceeding, make a note of the cable
routing. around the ECM and ECM bracket.
27. Working on the right hand side, detach the engine
management ECM rrom its bracket then disconnect
the two electrical connections.
1. Screw
2. ECM retaining bracket
28. Place the ECM to one side.
11.166
Service Manual - Rocket 1111 Classic 1 Touring
(
\