10
Maintenance
Correcting Leaks
Correcting Leaks
When
If a leakage has occurred in the flow cell area or at the heat exchanger or at the capillary
connections
Tools required
Tissue
Two 1/4 inch wrenches for capillary connections
Preparations
Remove the front cover.
1 Use tissue to dry the leak sensor area and the leak pan.
2 Observe the capillary connections and the flow cell area for leaks and
3 Replace the front cover.
226
correct, if required.
Figure 77
Observing for Leaks
Agilent 1260 Infinity DAD and MWD User Manual