Agilent Technologies 1260 User Manual page 201

N O T E
Depending on the system setup, the inlet capillary
might be routed directly from the module above or
below to the cell and not to the capillary holder.
4
Loosen the thumb screw and remove the flow cell outlet
capillary (bottom) with the union.
Agilent 1260 Infinity DAD and MWD User Manual
3
Disconnect the flow cell inlet capillary (top) and the waste
tubing (bottom) from the unions.
5
Remove the flow cell while pressing the flow cell holder.
Maintenance
Exchanging a Flow Cell
10
201